D-STAR Voice

Technical details

D-STAR transfers both voice and data via digital encoding over the 2 m (VHF), 70 cm (UHF), and 23 cm (1.2 GHz) amateur radio bands. There is also an interlinking radio system for creating links between systems in a local area on 10 GHz which is currently not in use in the Denver system.

Within the D-Star Digital Voice protocol standards (DV), voice audio is encoded as a 3600 bit/s data stream using proprietary AMBE encoding, with 1200 bit/s FEC, leaving 1200 bit/s for an additional data "path" between radios utilizing DV mode. On air bit rates for DV mode are 4800 bit/s over the 2 m, 70 cm and 23 cm bands.

In addition to DV mode, a high speed Digital Data (DD) mode can be sent at 128 kbit/s only on the 23 cm band. A higher-rate proprietary data protocol, currently believed to be much like ATM, is used in the 10 GHz "link" radios for site-to-site links.

Radios providing DV data service within the low-speed voice protocol variant typically use an RS-232 or USB connection for low speed data (1200 bit/s), while the Icom ID-1 23 cm band radio offers a standard Ethernet connection for high speed (128 kbit/s) connections, to allow easy interfacing with computer equipment.[2]

The WØCDS Denver system is located at Thorodin Mountain, West of Rocky Flats.

VHF: 145.250 -600kc
UHF: 446.9625 -5MHz
1.2: 1283.9625 -12MHz

Created by John Maxwell, WØVG